Microscan MS-820 User Manual page 135

Warning Messages
Laser High
When enabled, a message is transmitted whenever the laser current exceeds a factory-
calibrated reference value which cannot be altered. The message repeats once every 30
minutes until the condition is corrected.
Laser High Status
Usage: Alerts the user to impending laser failure. (Contact Microscan Service.)
Definition: Enables the Laser High message.
Serial Cmd: <K"warning message
novram corrupt warning status>
Default: Enabled
Options: 0 = Disabled
Laser High Message
Definition: Defines the Laser High message.
Serial Cmd: <K;laser high message>
Default: HI-LASR
Options: Any 1 to 10 character ASCII string except NUL, <, or >.
MS-820 Industrial Bar Code Scanner User's Manual
8-6
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
status,laser high status,laser low status,
1 = Enabled