Partial Output - Microscan MS-820 User Manual

Partial Output

Usage: In Multisymbol mode, partial output is performed on each separate
symbol. For example, if Start Position is set to 3 and Partial Length is
set to 5, the following symbols are transmitted as follows:
1234567890 as 34567
1234 as 34
123456789,abcde as "34567,cde" (two symbols with separator)
12 as [blank]
Definition: When enabled, allows you to pre-select portions of symbols to be transmit-
ted by the scanner.
Partial Output Status
<KYstatus,start postion,length>
Serial Cmd:
Default: Disabled
Options: 0 = Disabled
Start Position (Partial Output)
Definition: Allows you to determine the first character from the beginning of a sym-
bol to transmit.
Serial Cmd: <KYstatus,start
Default: 1
Options: 1 to 2710
Length (Partial Output)
Definition: Allows you to determine the number of characters to be transmitted.
Serial Cmd: <KYstatus,start postion,length>
Default: 63
Options: 1 to 2710
MS-820 Industrial Bar Code Scanner User's Manual
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Chapter 6 I/0 Parameters
1 = Enabled
postion,length>
6-11