Communications - Microscan MS-820 User Manual

Chapter
3
Communications by ESP .........................................................................3-2
RS-232/422 Host Port..............................................................................3-3
RS-232 Auxiliary Port ..............................................................................3-9
Preamble ...............................................................................................3-17
Postamble ..............................................................................................3-18
LRC Status ............................................................................................3-19
Response Timeout.................................................................................3-20
Intercharacter Delay ..............................................................................3-21
With Microscan's ESP™ (Easy Setup Program), configuration changes can be made in
the ESP menus, then sent and saved to your scanner. The user can also send serial
commands to the scanner via the ESP's Terminal window.
This section includes connecting parameters and options for communicating by the aux-
iliary port and various interfaces.
Note: The characters NULL <> and
not through ESP or serial commands.
Note: Default settings for establishing communications are:
Baud = 9600
Parity = Even
Stop Bits = One
Data Bits = Seven
Flow Control = None
MS-820 Industrial Bar Code Scanner User's Manual
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Communications

Chapter Contents
, can only be entered through embedded menus,
3-1