Table of Contents
Advertisement
Easy Setup Mode
Easy Setup Mode
In
Easy Setup Mode
you are presented with the
your application, Calibration. After connecting to your scanner (or reader) the Setup
Mode will first appear. This will provide you with instructions specific to your model that
will help you in positioning, testing, and if appropriate, calibrating.
Test
Click the
Test
button to start the read rate test for a quick indication of the read capa-
bilities and the limits of your application. When Decodes per Second is unchecked,
the test will count the percentage of decodes relative to the number of actual scans.
Click
Stop
to end the test.
Calibrate
Some models include a calibration routine that will optimize reads by comparing read
rates at various settings in focal lengths, scan speeds, and gain settings.
Note: This view may be
slightly different for each
model.
MS-820 Industrial Bar Code Scanner User's Manual
2-2
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Test
option and if appropriate for
Test button
Click here to change
from percentage of
good decodes to
decodes per second
Calibration is avail-
able on some models
Saves Calibration
results (if available)
Ends the read rate
test
On some models, clicking Auto Discriminate
will enable most available symbology types.
Advertisement
Table of Contents
Need help?
Do you have a question about the MS-820 and is the answer not in the manual?
Questions and answers