Serial Trigger - Microscan MS-820 User Manual

Serial Trigger

Usage: Useful in applications where a read cycle needs to be initiated and/or
ended by user-defined serial characters.
Definition: An on-line host command composed of a single ASCII host serial trigger
character that initiates or ends the read cycle.
Serial Trigger Character
Usage: Useful in applications where a single serial character enclosed in angle
brackets initiates the read cycle.
Definition: A trigger character is one that starts the read cycle, is enclosed by delim-
iters < > and can only be sent when the trigger mode is set to Serial
Data or Serial Data & Edge.
Serial Cmd: <Kiserial trigger
Default: GS
(corresponds to ^] displayed in the embedded menu)
Options: Any single ASCII character, including control characters, except NUL
(00H), an existing host command character, or an on-line protocol char-
acter.
Note: Serial Data or Serial Data & Edge triggering mode must be enabled for Serial
Trigger Character to take effect.
MS-820 Industrial Bar Code Scanner User's Manual
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Chapter 4 Read Cycle
character>
4-11