Roller Assembly - Pitney Bowes DA80F Service Manual

DA80F (WF81) Parts Removal
5.11 Feed
Roller Pulley
and Feed
Roller
Assembly
(continued)
DA80F/DA95F AddressRight™ Printers Service Manual (SV61962 Rev. A)
5. On the back side, unfasten the four screws to separate the feed roller
mounting plate with bearing from the rear chassis assembly. Remove the
retainer and the flanged bearing from the feed roller assembly.
6. Remove assembly from back side.
7. Peel the worn crepe tires from the hub of the feed roller assembly.
8. Reinstall in reverse order.
NOTE: When replacing the tires on the feed roller assembly, check that
the cut of the crepe tires runs so the smoother cut is running forward.
Removal and Replacement • 5
Feeder Roller
Mounting Plate
Screws
Circled in
White

Roller Assembly

Rough Crepe
Grain Direction
Direction of Paper Flow
Crepe Tire
5-15