Power Supply - Pitney Bowes DA80F Service Manual

DA95F (WF96) - Printer Parts Removal
5.41 Power
Supply
DA80F/DA95F AddressRight™ Printers Service Manual (SV61962 Rev. A)
1. Turn off the power and unplug the printer.
2. Remove printer top cover (see section 5.28).
3. Flip printer onto its right side.
4. Unfasten two screws for power supply access cover and remove cover.
5. Disconnect AC input connector to power supply (see below).
5. Remove power supply cover fastened with four screws. NOTE: The fan
comes off with the cover.
Screws for Cover (circled)
6. Unplug remaining cable harness in supply to separate supply from chassis.
7. Unfasten four screws holding power supply to mounting panel and re-
move supply.
8. Reinstall in reverse order.
Removal and Replacement • 5

Power Supply

Access Cover
Screws for
Cover (Circled)
AC Input to Power Supply

Power Supply

Cover Removed, Connectors Circled
5-75