DA80F (WF81) Parts Removal
5.20 Power
Supply
DA80F/DA95F AddressRight™ Printers Service Manual (SV61962 Rev. A)
1. Turn off power and unplug printer.
2. Remove the front bottom cover (see section 5.8) to prevent the chance of
damaging the cover when laying the printer on its side.
3. Turn the printer onto its side. Unfasten the six screws securing the power
supply mounting panel.
4. Unfasten power supply harnesses from tie wraps/twist ties. Gently re-
move power supply and hold with hand (do not let hang).
5. Remove power supply cover fastened with four screws. NOTE: The fan
comes off with the cover.
6. Unplug two harnesses (see below) to separate power supply from chassis.
7. Unfasten four screws holding power supply to mounting panel and re-
move supply.
8. Reinstall in reverse order.
Removal and Replacement • 5
Screws for Power Supply
Mounting Panel (Circled)
Power Supply
Power Supply Cover
Cover Removed,
Harness Connectors
Circled
5-37