Exit Rollers; Sensor; Floor Assembly And Top Cover - Pitney Bowes W660 Operator's Manual

Exit Rollers

Sensor

Floor Assembly
and Top Cover
Pitney Bowes W660/W680 Operator Guide
If the right and left exit rollers are misaligned, that is, contact
printed surfaces, they can become contaminated with ink. Use
water to dampen a soft cloth and remove the ink from the rollers.
A film and/or dust can build up on the sensors and cause
misfeeds of the material. Lift the transport door and use com-
pressed air to blow dust from the sensors. Cans of compressed air
are available from many computer supply houses.
Periodically wipe the cover and floor assembly (feed deck) with a
soft cotton cloth, dampened with water only.
Printer Maintenance • 5
Sensor Location
5-3