Transport Motor Assembly - Pitney Bowes DA80F Service Manual

5 • Removal and Replacement
DA80F (WF81) Parts Removal
5.13 Transport
Motor
Assembly
5-18
1. Remove the rear cover (see section 5.2) and the front bottom cover (see
section 5.8).
2. Unplug the transport motor assembly cable (J27) from main board. Push
the cable through the opening in the rear chassis behind main board.
3. Turn the printer onto the side. Unfasten the four screws securing the bot-
tom access cover.
4. Unfasten the four screws securing the transport motor assembly to the
front plate assembly. Keep the back of the motor from dropping.
DA80F/DA95F AddressRight™ Printers Service Manual (SV61962 Rev. A)
Opening in Rear
Chassis to Push
Cable Through
Opening
Close up
(Behind Main
Board)
Screws for
Bottom Access
Cover (Circled)
Four Screws Holding

Transport Motor Assembly