Specific Maintenance - Pitney Bowes DA80F Service Manual

7 • Preventive Maintenance
7.2 Specific
Maintenance
7-2
Item What To Do
Lint and paper dust tend to build up on the
Feed Rollers
feed rollers over time. Clean the rollers
as needed, especially when they appear
glazed or have a yellowish residue. Use a
soft cotton cloth, dampened with alcohol, to
clean all rubber rollers.
If the tires on the main feed rollers have de-
teriorated to the point that cleaning cannot
restore them, replace them. See Chapter 5
of this manual for instructions.
Periodically wipe the machine covers and
Feed Deck
deck assembly with a soft, cotton cloth
And Covers
dampened with water only.
If the idler rollers are misaligned, it is possi-
Exit Idler
ble for ink to transfer from the material onto
Rollers
the roller surface.
Use a soft cloth dampened with water to
remove the ink from the rollers.
With use, a dusty film builds up on the sen-
Paper, Exit,
sor. This can eventually cause misfeeds.
and Feeder
Sensor
Use compressed air to blow dust from the
sensor. If a film has developed over the
sensor, remove the sensor and clean it with
alcohol. See Chapter 5 of this manual for
removal instructions.
The print head periodically performs a self
Print Head
cleaning cycle. If print quality is unaccept-
able, select the Purge function from the LCD
Main Menu or Software Control Panel.
If problems still persist perform the follow-
ing:
• Wipe the print head cartridge nozzles us-
ing a soft cotton cloth dampened with water.
• If cleaning doesn't fix the problem, install a
new ink cartridge.
• Check the flex circuit for crushed dimples
The pan assembly at the bottom of the print-
Pan Assembly
er collects paper dust.
Remove the bottom Pan Access Cover peri-
odically and clean dust from the printer.
DA80F/DA95F AddressRight™ Printers Service Manual (SV61962 Rev. A)
How Often
Monthly or
as Needed
Quarterly
Monthly or
as Needed
Weekly
As Needed
Annually