5
Printer maintenance
®
AddressRight
Printer DA700/DA750
Exit Rollers
Sensor
Print Head
Shaft
Floor
Assembly and
Top Cover
If the right and left exit rollers are misaligned, that is,
contact printed surfaces, they can become contaminated
with ink. Use water to dampen a soft cloth and remove
the ink from the rollers.
A film and/or dust can build up on the sensors and cause
misfeeds of the material. Lift the transport door and use
compressed air to blow dust from the sensors. Cans of
compressed air are available from many computer supply
houses.
Periodically wipe the print head shaft clean with a dry,
soft, lint free, cotton cloth. DO NOT OIL!
Print Head Shaft
Periodically wipe the cover and floor assembly (feed deck)
with a soft cotton cloth, dampened with water only.
SV61027C · Rev A
Operating Guide
Sensor Location
Page 5-3