Print Specifications - Pitney Bowes DA80F Service Manual

2.4 Print
Specifications
DA80F/DA95F AddressRight™ Printers Service Manual (SV61962 Rev. A)
Print Modes (Print Resolution)
The printers have four print resolutions; they are Executive (600 DPI), Letter
(300 DPI), Draft (200 DPI), and Super Draft (150 DPI), which represent the
horizontal density. Additionally, there are two Light Mode settings (ON and
OFF), which represent the vertical density. When Light Mode is "ON", the
vertical density setting is 300 DPI; when Light Mode is "OFF" the vertical den-
sity setting is 600 DPI. Refer to the table below for print mode options.
Print Quality
Executive
Letter
Draft
Super Draft
Fonts
Resident Fonts
Arial, Comic Sans MS, Courier New, Georgia, Impact, Kino, MSLogo, Sym-
bol, Tahoma, Times New Roman, Trebuchet MS, Verdana, Webdings, Wing-
dings, plus there must be included one OCR and one Code 39 font. (All fonts
are scalable from 4 to 108 pt size.)
Resident Font Enhancements
Bold, Underline, Italic
Downloadable Fonts
Supports TrueType and Bitmapped fonts.
Downloadable Graphics
Supports Bitmap and PCL Raster images up to 40 sq in. (258 sq. cm). This
translates to images up to 3" x 13.3" (76mm x 338mm) for the DF95.
User-Definable Parameters
• Font Characteristics
• Address Placement
• Barcode Characteristics
• Print Quality
Barcode Printing Position
The printer can print a barcode in one of three positions:
• Above the address block
• Below the address block
With Light Mode set to
"ON"
600 x 300 DPI
300 x 300 DPI
200 x 300 DPI
150 x 300 DPI
Specifications • 2
With Light Mode set to
"OFF"
600 x 600 DPI
300 x 600 DPI
200 x 600 DPI
150 x 600 DPI
2-3