5 • Removal and Replacement
DA95F (WF96) - Standard Feeder (WF9S) Parts Removal
5.22 Rear
Cover/Side
Guides on
Standard
Feeder
(continued)
5-40
6. Using a regular screwdriver, release the four 1/4 turn studs on the feeder
deck. Turn each stud counterclockwise a quarter turn. NOTE: The four
1/4 turn studs are permanently attached and cannot be removed.
7. Lift the deck assembly. Unhook the front of the deck and slide it beneath
the side guides.
8. Locate and remove from the inside of the feeder assembly the four
screws that secure the rear cover. Remove the rear cover.
DA80F/DA95F AddressRight™ Printers Service Manual (SV61962 Rev. A)
1/4 Turn
Studs for
Feeder Deck
(Circled)
Feeder With Deck
and Side Guides
Removed
Screws For
Rear Cover
(Circled)