Pitney Bowes DA80F Service Manual page 44

4 • Troubleshooting/Diagnostics
4.6 Feeding
Issues
✍
TIP: If you have a
DA95F printer and are
NOT using the stan-
dard feeder (WF9S),
the Feeding Issues
tables on these pages
will NOT apply. Please
refer instead to the
documentation sup-
plied with your feeder.
4-18
Table 4-8 Feeding Issues
Symptom Possible Cause
Media jam
Envelope jams,
resulting in Jam
at xxxx" Errors
Media sticking together
Media out of spec
"H" Block separators improp-
erly adjusted
Faulty or dirty sensor
DA80F/DA95F AddressRight™ Printers Service Manual (SV61962 Rev. A)
Solution
Paper path obstructed; clear
jam
Fan media before placing on
feed rollers
Min. thickness 0.003" (0.08 mm)
Max: 0.25" (6.3 mm) (DA80F)
Max: 0.50" (12.7 mm) (DA95F)
Adjust to thickness of material
Clean sensors with canned air
or soft cotton cloth, replace if
necessary