Lcd Setup Menu; Use Conveyor - Pitney Bowes DA80F Service Manual

Appendix A • Printer Control Panel Menus and Utilities
A.4 LCD
Setup Menu
✍
TIP: Press - or + to
scroll through the sub-
menus within a menu
or the settings within a
menu/submenu option.
Press Enter to select
the desired menu op-
tion or a submenu op-
tion, or to define a new
setting.
✍
TIP: Virtually all of the
settings in the printer
control setup menu
are overruled by the
Windows application
sending the print job
to the printer.
A-10
To access the Setup Menu:
Press On Line. The LCD displays "OFF LINE" and the green light goes out.
Press and hold Menu for two seconds.
Setup Menu
1. Stop on Feed Error
2. Feeder Setup
a. Feeder Type
b. Feeder Signal
c. Mode
d. Signal Polarity
e. Pulse Time (msec)
3. Conveyor Setup
a. Use Conveyor
b. Conveyor type
c. Activate Polarity
d. Conveyor On time
4. Lines Per Address
5. Communications
a. TCP/IP
b. Line Termination
c. Clear Memory
6. Language
a. Symbol Set
b. Inch/Millimeter
c. Menu Languages
7. Transport Speed
8. Feed Gap
a. Feed Gap Type
b. Feed Gap Distance
9. Ink Cartridge Volume
1. Stop on Feed Error
Menu Option Settings
Off,
Stop on Feed
On
Error
DA80F/DA95F AddressRight™ Printers Service Manual (SV61962 Rev. A)
10. Pre-Purge
a. Purge at Start
b. Periodic Purge
c. Purge Interval
d. Nozzle Keep Alive
11. Bundle Break*
a. Enable/Disable
b. Break Character
c. Break Character Count
d. Character Orientation
e. Break Location
f. Print Break Characters
g. Break Pause Time
12. Tray Break*
a. Enable/Disable
b. Break Character
c. Break Character Count
d. Character Orientation
e. Break Location
f. Print Break Characters
g. Break Pause Time
13. Low Ink Warning
a. Display Warning
b. Warning Threshold
c. Stop When Empty
14.Hex Dump*
15. ROM Revision #
*Feature not functional at the time of this
writing but planned for a future release.
What It Does
Allows you to set the printer to stop when it
encounters any feed error.