Equipment Rack - Alcatel-Lucent 7750 SR-a4 Installation Manual

Equipment Rack

7750 SR-a4 and SR-a8 Installation Guide
Warning:
• Ensure that you follow the equipment rack manufacturer's instructions for correct rack
installation.
• Ensure that you comply with the location requirements outlined in
Requirements on page 59
correct airflow and may result in the system overheating.
The router must be installed in an equipment rack. The router cannot operate from a tabletop
or floor.
The 7750 SR-a chassis are designed to be front mounted and installed in an EIA-310 standard
19-in. (482.6 mm) equipment rack.
The chassis have integrated mounting flanges for front-mount installation in a 19-in.
(482.6 mm) rack. The rail mounting holes in the equipment rack must align with the
mounting holes on the chassis mounting flanges.
. Failure to comply with these requirements may impede
Figure 14
Site Preparation
Chassis Location
shows the dimensions of the rack.
57