7750 SR-a Module LEDs and Connectors
IOM-a LEDs
1
Pwr
Stat
2
Key
Label/Part
1
Captive
screws
2
Pwr / Stat
3
Ejector
levers
146
Figure 48
shows the IOM-a, which is used in the 7750 SR-a4 and 7750 SR-a8.
describes the parts and LEDs.
3
Table 59: 7750 SR-a IOM LED Descriptions
Sub-
Description
category
—
Secures the IOM-a in place.
Power
Blue (solid): Power to the IOM-a is on.
LED
Unlit: There is no power to the IOM-a or the power is faulty.
Status
Green (slow blink): The IOM-a is loading firmware and running CPU
LED
diagnostics.
Green (solid): The IOM-a boot/load process is complete and the IOM-a is
operational.
Unlit: The IOM-a is operationally down and administratively down.
—
One on each side of the IOM-a. The levers are used to remove or install the
IOM-a.
Figure 48: IOM-a LEDs
7750 SR-a4 and SR-a8 Installation Guide
Table 59
1
3
24570