Removing and Replacing an MDA-a or MDA-aXP Card
Removing an MDA-a
206
Figure 75
shows how to remove an MDA-a from the 7750 SR-a4 chassis.
describes the features. The same method applies to the MDA-a cards in the 7750 SR-a8
chassis.
Key
Description
1
MDA-a positioned in the chassis slot guides
2
MDA-a captive screws (one on each side of the MDA-a)
3
Threaded receptacle
Required tools:
•
#2 Phillips or flat blade screwdriver
To remove an MDA-a:
Step 1. Disconnect all cables connected to the MDA-a ports.
Step 2. Use a Phillips screwdriver to loosen the MDA-a captive screws (Key 2 in
Figure
75).
Figure 75: Removing an MDA-a
2
Table 103: Removing an MDA-a Features
7750 SR-a4 and SR-a8 Installation Guide
Table 103
3
1
2
24594