Installing the Wire-Form Cable Guides
Left bracket,
holes 1 and 3
7750 SR-a4 and SR-a8 Installation Guide
Two wire-form cable guides are supplied with each 7750 SR-a4 and 7750 SR-a8 chassis. The
guides are shipped in the accessory box with the chassis. Each guide has a series of hooks to
route and retain the chassis cables.
The wire-form cable guides are optional. Wire-form cable guides are designed for
horizontally deployed systems but can also be used for vertically mounted systems.
If you choose to use the wire-form cable guide, you can install one on one side or one on each
side. The guides are installed on the chassis on the rack flanges on the left and right side using
two screws, which are not included with the guides.
Figure 25: Wire-Form Cable Guides
Installing the 7750 SR-a Chassis
Figure 25
shows the guides.
Right bracket,
holes 2 and 4
24663
89