Removing and Replacing a Fan Tray
Removing a Fan Tray
1
1
186
Figure 66
shows how to remove the fan tray from the 7750 SR-a4 chassis.
the features. The same method applies to the fan tray in the 7750 SR-a8 chassis.
Figure 66: Removing the Fan Tray (7750 SR-a4)
Key
1
Required tools:
•
#2 Phillips or flat blade screwdriver
To remove the fan tray:
Step 1. Unpack the replacement fan tray from the protective packaging. Place the fan tray
on an antistatic surface.
Step 2. To remove the fan tray from the chassis, use a screwdriver to loosen the captive
screws on the fan tray faceplate.
Step 3. Grip the two captive screws (Key 1 in
of the chassis and allow the fans to stop spinning.
Table 94: Fan Tray Removal Features
Description
Captive screws
7750 SR-a4 and SR-a8 Installation Guide
Figure
66), and pull the fan tray halfway out
Table 94
describes
24585