Replacing A Cpm-A; Table 99 Replacing A Cpm-A Features; Figure 71 Replacing A Cpm-A - Alcatel-Lucent 7750 SR-a4 Installation Manual

Removing and Replacing a CPM-a

Replacing a CPM-a

194
Step 4. Place the CPM-a on an antistatic surface or in an antistatic bag.
Step 5. Do one of the following:
a. If you are installing a replacement CPM-a, go to
194.
b. If you are not installing a replacement CPM-a module, insert an impedance
panel in the empty slot.
The following procedure assumes that you have removed the CPM-a, as described in
Removing a CPM-a.
Figure 71 shows how to replace a CPM-a in the 7750 SR-a4 chassis.
features. The same method applies to the CPM-a in slot 7 of the 7750 SR-a8 chassis.
2
Key Description
1 Chassis slot guide
2 Captive screws
Figure 71: Replacing a CPM-a
Table 99: Replacing a CPM-a Features
7750 SR-a4 and SR-a8 Installation Guide
Replacing a CPM-a on page
Table 99
1
2
describes the
3
24559