CPM-a Port Types
OES Port
Sync-E/1588v2
BITS Port
216
The CPM-a supports one Open Enterprise Server (OES) 10/100 Mb/s Ethernet RJ-45 port.
The OES port is reserved for future use.
The CPM-a supports one Sync-E/1588v2 timing port, which uses an RJ-45 connector. The
Sync-E/1588v2 port is reserved for future use.
The BITS port is provisioned with an RJ-45 jack and used for the network clock source. Use
shielded cable when connecting to the BITS port.
numbers.
Table 110
specifies the BITS port connector pinouts.
Table 110: BITS Port Pinouts—RJ-45 Female
Pin
Signal
1
RXRING
2
RXTIP
3
NC
4
TXRING
5
TXTIP
Figure 80: BITS Port Pin Numbers
Pin 8
Pin 1
Direction
Description
Input
Receive Ring Signal
Input
Receive Tip Signal
—
Not connected
Output
Transmit Ring Signal
Output
Transmit Tip Signal
7750 SR-a4 and SR-a8 Installation Guide
Figure 80
shows the BITS port pin
19593