7750 SR-a4 and SR-a8 Installation Guide
Key
1
2
3
Required tools:
•
#2 Phillips or flat blade torque driver
To install an MDA-a card:
Step 1. Remove the MDA-a from the packaging and place it on a flat antistatic work
surface. Do not touch the printed circuit board or connector pins. Hold the card by
the edges.
Step 2. Locate the appropriate chassis slot and MDA-a or MDA-aXP slot.
Figure 40: Installing an MDA-a (7750 SR-a8)
2
Table 52: MDA-a Installation Features
Description
Slot guide
Captive screw
Threaded receptacle
Installing Components
3
1
2
24550
117