Unpacking the Chassis
Accessories
74
Caution: There are no handles or hand grips on the 7750 SR-a chassis. Lift the chassis by
its rack mounting brackets. Do not put your hands inside the chassis.
Step 5. Remove the protective antistatic wrapping when you are ready to install the chassis.
Table 34
lists the contents of the accessories kit.
Quantity
Accessory
1
Console cable
2
10-32 KEP nuts for ground lug
1
45-degree ground lug
2
Wire-form cable guide specific to the chassis size
2
ETSI bracket specific to the chassis size, to accommodate the 535-mm
mounting width aperture of the ETSI 600 mm wide by 300 mm deep rack
8
12-24 Phillips screws for adapter brackets for ETSI rack
1
ESD wrist strap
Table 34: Accessories List
7750 SR-a4 and SR-a8 Installation Guide