Technical Specifications; Power Consumption; 4-Port 10Gige Sfp+ Mda-A Leds; Table 69 4-Port 10Gige Sfp+ Mda-A Specifications - Alcatel-Lucent 7750 SR-a4 Installation Manual

Technical Specifications

Power Consumption

4-port 10GigE SFP+ MDA-a LEDs

7750 SR-a4 and SR-a8 Installation Guide
The card is limited to 25 Gb/s; installing the card in a 100 Gb/s slot does not increase the
throughput.
Table 69: 4-port 10GigE SFP+ MDA-a Specifications
Parameter
Dimensions (H x W x D)
Weight
Table 70 lists the power consumption values for the 4-port 10GigE SFP+ MDA-a.
Table 70: 4-port 10GigE SFP+ MDA-a Power Consumption Values in Watts
1
Idle
0
Note:
1. Idle: Slots not configured or provisioned
2. Zero Traffic: Traffic load: 0% line rate at 25ºC (reset case)
3. Typical: Traffic load: 50% line rate with Internet mix (IMIX) at 25ºC
4. Worst Case: Traffic Load: 100% line rate with IMIX at the maximum short duration and at a high temperature
(65ºC)
Figure 51 shows the 4-port 10GigE SFP+ MDA-a.
Appendix B: MDA-a and MDA-aXP Card Descriptions
Description
1.4 x 7.6 x 9.0 in. (3.56 x 19.30 x 22.86 cm)
1.90 lb (0.86 kg)
2
Zero Traffic
32
3
Typical
32
Table 71 describes the LEDs.
4
Maximum Power
35
155