Replacing An Iom-A; Table 102 Replacing An Iom-A Features; Figure 74 Replacing An Iom-A - Alcatel-Lucent 7750 SR-a4 Installation Manual

Removing and Replacing an IOM-a

Replacing an IOM-a

3
4
202
The following procedure assumes that you have removed the IOM-a, as described in
Removing an IOM-a.
Figure 71 shows how to replace an IOM-a in slot 3 of the 7750 SR-a4 chassis.
describes the features. The same method applies to the IOM-a in slots 3 and 6 in the
7750 SR-a8 chassis.
Figure 74: Replacing an IOM-a
Key Description
1 IOM-a positioned in the chassis slot guides
2 Threaded receptacle on the chassis
3 IOM-a captive screws, one on each side of the IOM-a
4 Ejector lever, one on each side of the IOM-a (in open position)
Required tools:
• #2 Phillips or flat blade torque driver
To replace an IOM-a:
Table 102: Replacing an IOM-a Features
7750 SR-a4 and SR-a8 Installation Guide
2
1
3
4
Table 102
24560