Rack-Mounting The Switch - Alcatel-Lucent OmniSwitch 6850E Series Hardware User's Manual

Mounting the Switch

Rack-Mounting the Switch

Refer to the important guidelines below before installing the OmniSwitch chassis on a rack.
• It is recommended that two people install the switch on the rack—one person to hold the chassis and
position it on the rack, and a second person to secure the chassis to the rack using attachment screws
(not supplied).
• Alcatel-Lucent provides two rack-mount flanges with each OmniSwitch switch. These flanges support
standard 19-inch rack-mount installations. These flanges must be attached to the chassis before the
switch can be rack mounted.
If you are installing the switch in a 23-inch-wide rack, Alcatel-Lucent offers optional 23-inch rack-
Note.
mounting hardware. For more information, contact your Alcatel-Lucent representative.
• Alcatel-Lucent does not provide rack-mount screws. Use the screws supplied by the rack vendor.
• To prevent a rack from becoming top heavy, it is recommended that you install heavier equipment at
the bottom of the rack, whenever possible.
• If you are installing the switch on a relay rack, be sure to install and secure the rack per the rack manu-
facturer's specifications.
• Review
page 2-32
Rack Mounting Steps
To rack-mount the switch, follow the steps below:
1 Align the holes in the provided rack-mount flanges with the four threaded holes in the OmniSwitch
chassis. These threaded holes are located in the left and right sides of the chassis, near the front panel.
2 Attach the flanges to the chassis using the provided Phillips-head screws. Be sure to tighten each of the
screws firmly using a Phillips screwdriver.
page 2-36
for important chassis airflow and access recommendations before installing.
Attaching a Rack-Mount Flange
OmniSwitch 6850E Series Hardware Users Guide
OmniSwitch 6850E Series Chassis and Hardware Components
le
n s o
C o
4 5
4 6
January 2013