Removing a CPM-a
7750 SR-a4 and SR-a8 Installation Guide
Figure 70
shows how to remove a CPM-a from the 7750 SR-a4 chassis.
the features. The same method applies to the CPM-a cards in the 7750 SR-a8 chassis.
2
Key
Description
1
Slot guide
2
Captive screws
3
Threaded receptacle
Required tools:
•
#2 Phillips or flat blade screw driver
To remove a CPM-a:
Step 1. Disconnect all cables connected to the CPM-a ports.
Step 2. Use a screwdriver to loosen the captive screws.
Step 3. Grip the CPM-a captive fasteners and slide the CPM-a out of the slot.
Figure 70: Removing a CPM-a
Table 98: Removing a CPM-a Features
Appendix C: Field-Replaceable Units
2
Table 98
describes
3
1
24559
193