Display Pex Working-Mode - H3C S7500E-XS Series Command Reference Manual

Predefined user roles
network-admin
Parameters
text: Configures a description, a case-sensitive string of 1 to 79 characters.
Examples
# Configure a description for PEX port 2.
<Sysname> system-view
[Sysname] pex-port 2
[Sysname-pex-port2] description connecttodep2

display pex working-mode

Use display pex working-mode to display the operating mode configuration of PEXs in the IRF 3
system.
Syntax
display pex working-mode { all | slot slot-number1 [ to slot-number2 ] }
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
all: Specifies all PEXs.
slot slot-number1: Specifies a PEX by its virtual slot number.
slot slot-number1 to slot-number2: Specifies a range of PEXs. The slot-number1 argument
represents the start PEX slot number. The slot-number2 argument represents the end PEX slot
number. The value for the slot-number2 argument must be greater than or equal to the value for the
slot-number1 argument.
Examples
# Display the operating mode configuration of all PEXs.
<Sysname> display pex working-mode all
PEX device mode Configuration:
Switch mode at startup:
None
PEX mode at startup:
Slots 129
Table 7 Command output
Field
PEX device mode Configuration
Switch mode at startup
PEX mode at startup
Description
Displays the operating mode configuration for PEXs.
Displays the virtual slot number information for PEXs that will
operate in switch mode after a reboot.
Displays the virtual slot number information for PEXs that will
operate in PEX mode after a reboot.
27