Radio Wide Features Configuration Menu - Motorola MCS 2000 User Manual

Radio Wide
Features
Configuration Menu
DCC
F2 - BUTTON CONFIG
(Button Configuration)
F3 - SWITCH CONFIG
(Switch Configuration)
F4 - MENU ITEM
(Menu Item Configuration)
F5 - DEK Config
(DEK Configuration)
At the MAIN MENU, press F4, and then F3 twice to access this screen.
MOTOROLA Radio Service Software
MCS Model:
MAIN:CHANGE/VIEW:CONFIG:FEATURES

RADIO WIDE FEATURES CONFIGURATION MENU

--------------------------------------
F1 - HELP
F2 - Button/Rotary Configuration
F3 - Switch Configuration
F4 - Menu Item List Configuration
F5 - DEK Configuration
F6 -
F7 -
F8 -
F9 -
F10 - EXIT, Return to Radio Wide Configuration Menu
F1 F2 F3
HELP BUTTON SWITCH MENU
CONFIG CONFIG ITEM
This screen is a multi-level menu that is used to change, view, or
modify codeplug features and option configurations that affect both
Conventional and Trunking operation. Typically, when you begin to
edit a codeplug, you must access this menu and configure Radio wide
options first by working your way through the screens located below
this menu. This will allow the options on other screens to reflect Radio
wide options. Some fields will not be visible if the radio does not support
the options that they relate to.
The radio is shipped from the factory with a preset feature and option
configuration, including the configuration of the control buttons,
switches, and menu (display models). The function (and location) of
most of these operator controls may be modified if necessary to
provide more user flexibility and/or permit access to other user-
defined features and options.
Note: Do NOT duplicate a function on multiple controls (on a
button and a switch, or a button and a menu, or a switch and a
menu for instance). This may cause the radio to malfunction
and may confuse the operator.
Brings up a screen where you can edit button assignments for the
radio.
Brings up a screen where you can edit switch assignments for the
radio.
Brings up a screen where you can configure menus that appear on the
radio's display. Menu items are supported only on front-display models.
Brings up a screen where you can edit DEK (Direct Entry Keypad)
button assignments for the radio.
Select Function F1 - F10.
F4 F5 F6 F7
DEK
CONFIG
F8 F9 F10
EXIT
105