Motorola MCS 2000 User Manual page 31

Memory Optimization
TCMS Path
RIB
This field is used to control Memory Optimization for the RSS. When
enabled, Memory Optimization performs a memory cleanup for
successive codeplug reads. This allows computers with a limited
amount of available Random Access Memory (RAM) to perform a
greater number of codeplug reads before experiencing possible system
problems. However, this feature will cause system delays in successive
reads while the RSS performs the optimization. If your computer has
greater than 8MB of total RAM memory, it is recommended that you
leave this feature disabled.
The factory default is Disabled.
Enter the DEFAULT directory path from where TCMS Update files will
be retrieved. The GET/SAVE GET TCMS file function will default to this
path. Please refer to your computer owner's manual for a complete
description of directories and path names.
Use the UP/DOWN arrow keys to select the asynchronous
communications port (COM 1, COM 2, COM 3 or COM4) to which
the RIB (radio interface box) is connected. If you are not sure how your
computer is configured or if you have two asynchronous
communications ports, first select COM 1 and use the COM TEST (F6)
function to communicate with a radio. If the test fails, select COM 2
and repeat COM TEST. Repeat the same procedure for COM 3 and
COM 4. Make sure that all cables and power supplies are connected
according to instructions provided in this manual.
25