Motorola MCS 2000 User Manual page 103

Channel Grant Polarity
Data Mode Request Polarity
MLU Operation
Data Overrides Voice
Ignore Data Display
Use the UP/DOWN arrow keys to select Active High or Active Low. The
value in this field determines the polarity of output signal CG.
The default is Active High.
Use the UP/DOWN arrow keys to select Active High or Active Low. The
value in this field determines the polarity of the input signal DMR.
The default is Active Low.
If this field is enabled, the radio will allow conventional channels to
be used for both voice and data operation. If disabled, conventional
channels are used for either voice or data operation (voice and data are
mutually exclusive).
Use the UP/DOWN arrow keys to enable the VRM100 Data Overrides
Voice feature.
When enabled, VRM100 data transmissions will have priority over all
voice transmissions (data messages will interrupt voice calls) except
Emergency Voice transmissions.
When disabled, data messages will NOT interrupt voice calls.
The factory default is Disabled.
This field is used to enable/disable the Ignore Data Display feature.
When the Ignore Data Display feature is enabled, the radio will not
display 'DATA TRANSFER' when in data mode; instead, the normal
mode alias is displayed.
The factory default is Disabled.
97