Transmitter Alignment Menu - Motorola MCS 2000 User Manual

Transmitter
Alignment Menu
BB
40
From the MAIN MENU, press F2 twice to access the TRANSMITTER
ALIGNMENT MENU.
MOTOROLA Radio Service Software
MCS Model:
...SERVICE:TRANSMITTER ALIGNMENT MENU
F1 - HELP
F2 - Reference Oscillator
F3 - Tx Power
F4 - Tx Deviation Balance (Compensation)
F5 - Tx Deviation Limit
F6 - Tx Deviation Limit: Reference
F7 -
F8 - Secure Tx Deviation
F9 - Tx Current Limit
F10 - Exit, Return to Service Menu
F1 F2 F3
HELP REF TX
OSC PWR
Standard periodic alignment procedures are performed from this
menu. Refer to your Radio Service Manual for alignment procedures.
The following alignment procedures must be performed every time
the modulation circuitry is replaced:
Modulation Balance
Modulation Limit: VCO Attenuator
Modulation Limit: Reference Attenuator
In addition, signalling deviation for DTMF, MDC, Single Tone,
SECURE and High-Speed Trunking Data should be checked every time
the radio is serviced. Prior to adjusting signalling deviation, radio
compensation/deviation adjustments must be made. No adjustments
are required for DPL, PL or Trunking Connect Tone Deviation.
These procedures should be attempted only by
!
qualified service personnel. Failure to perform
alignment procedures properly may result in seriously
Caution
degraded radio or system performance.
Select Function F1 - F10.

TRANSMITTER ALIGNMENT MENU

--------------------------
F4 F5 F6 F7
DEV DEV REF
BAL LIMIT ATTEN
F8 F9 F10
SECURE CUR EXIT
DEV LIMIT