Motorola MCS 2000 User Manual page 133

Trunking System ID (not shown)
Trunking System Type (not
shown)
Note: If the field displays "???", an invalid channel condition
exists.
This field is visible only if the Scan Type field is set to Priority Monitor or
Subfleet. Use the UP/DOWN arrow keys to select the Trunking System
this personality is to use. (The System ID is shown according to system
number.)
Note: The Trunking System should be set up in the TRUNKING
SYSTEM screen (F4/F4/F3) before personality information is
entered since some fields in this screen depend on system
information.
The default is 1-0001.
This field is read-only and is visible only if the Scan Type field is set to
Priority Monitor or Subfleet. The value in this field is derived from
settings in the TRUNKING SYSTEM screen (F4/F4/F3).
127