Motorola MCS 2000 User Manual page 26

F5 - PRINT MENU
F6 - FILE MAINTENANCE
F8 - FLASHport UPGRADE
F9 - SETUP
F10 - EXIT
20
Note: An archive file can be accessed without a radio being
connected.
Prints selected codeplug data.
Brings up a menu which allows you to easily create directories and
delete files without exiting the RSS.
You must have FLASHport software installed on your computer in order to
access this menu. Brings up a menu from which you can view the radio's
configuration, its FLASHkey contents, upgrade the codeplug, and
FLASH the radio.
Brings up a menu which is used to configure the RSS according to
specific user requirements. Default disk drives, communication ports
and even screen colors may be customized to suit your needs.
Used to quit the program and return to DOS. You will have to press this
key and then F2 to actually exit the program.
Note: Make sure that all desired codeplug changes have been
programmed back to the radio and that an archive copy has
been made. If this is not done, all changes will be lost since DOS
erases this data from the computer's memory when you exit the
program.