Motorola MCS 2000 User Manual page 121

Trunk Item
CALL Select Private Call ID.
For the radio to function properly, this feature must also be enabled on the TRUNKING PERSONALITY screen
(F4/F4/F4).
CHAN Select/change Channels.
DIM Change the display brightness to one of four levels: from off to high, high to medium, medium to
low, or low to off.
FScn The Spectrum Scan menu item is used with SmartZone to initiate/continue a Full Spectrum CC Scan.
When selected, the radio will scan the spectrum for a control channel with a system ID that matches
the system that the radio is currently using. If the radio finds a control channel, it will stop. If the
menu item is selected again, the radio will pick up where it left off in the spectrum and continue
scanning. The radio automatically stops scanning if it does not locate a control channel before the
Full Spectrum CC Scan Timer expires. The Timer duration can be set in the SmartZone Environment
screen (MAIN-F4-F4-F2-F2). The radio operator can manually stop the scanning by changing the
radio's mode.
Full Spectrum CC Scan must be enabled on the SmartZone Environment screen for this feature to
function properly.
H/L Enable/disable Horn and Lights.
This feature must also be enabled on the ALARM OPTIONS screen (F4/F3/F7).
HAND Toggle between Handset and Microphone operation. In Handset operation, the audio is re-routed to
the Handset speaker for a private conversation when the handset is removed from its hang-up clip. In
Microphone operation, the audio is always routed through the speaker.
This feature is not compatible with the Hand Held Control Head (HHCH) feature.
MSG Display the last acknowledged message to be transmitted and send a message.
MUTE Enable/disable keypad beeps.
PAGE Select Call Alert ID.
For the radio to function properly, this feature must also be enabled on the TRUNKING PERSONALITY screen
(F4/F4/F4).
PHON Select DTMF Phone Number to be transmitted.
For the radio to function properly, the Phone Interconnect feature must also be enabled on the TRUNKING
PERSONALITY screen (F4/F4/F4).
PROG Change Phone/Scan lists.
For the radio to function properly, the Phone and/or the Scan feature must also be enabled on the TRUNKING
PERSONALITY screen (F4/F4/F4).
PSWD Change Radio Lock Password.
For PSWD to show on the RADIO WIDE MENU ITEM CONFIGURATION screen. RADIO LOCK must
be enabled on the RADIO WIDE DISPLAY OPTIONS screen (F4/F3/F6).
PWR Enable/disable Tx Low Power.
RPGM Request Dynamic Regrouping.
SCAN Enable/disable Channel Scan.
For the radio to function properly, this feature must also be enabled on the TRUNKING PERSONALITY screen
(F4/F4/F4).
Use the UP/DOWN arrow keys to select the desired menu function.
Use F7 to add, and F9 to delete, Trunking Menu functions. Depending
on your radio version and model number, you will be able to choose from all
or some of the functions listed below.
IMPORTANT
115