Motorola MCS 2000 User Manual page 222

DTMF Access Timing Table
Initial Delay (ms)
Digit Duration (ms)
Integer Delay (ms)
216
Use the UP/DOWN arrow keys to select the set of DTMF timing
parameters for this personality. Timing can be changed for Initial
Delay, Digit Duration and Integer Delay. The radio contains a table
with four sets of values for each of these parameters. The actual
parameters are entered on the RADIO WIDE PHONE
CONFIGURATION screen (F4/F3/F4).
The default is DTMF timing parameter set to one.
This a view-only field. The value shown here depends on the DTMF
Access Timing Table chosen.
This a view-only field. The value shown here depends on the DTMF
Access Timing Table chosen.
This a view-only field. The value shown here depends on the DTMF
Access Timing Table chosen.