Device Troubleshooting In Unified Network Configurator; Gtr 8000 Base Radio Troubleshooting In Configuration/Service Software; Figure 90: Moscad Network Fault Management - Example - Motorola ASTRO 25 GTR 8000 Manual

Figure 90: MOSCAD Network Fault Management – Example
When an alarm condition occurs, the alarm device for one of the modules begins to flash red. Selecting
the LED box opens an alarm pop-up window indicating details of the alarm. To view the status of all
alarms for a particular module within the device, select the alarm LED box corresponding to the
particular module. Alarms can be acknowledged by pressing the Acknowledge button on the screen.
See the MOSCAD Network Fault Management Feature Guide for details.
NOTICE: The Unified Event Manager (UEM) can be established as a more centralized fault
management solution replacing the MOSCAD GMC. See the Unified Event Manger manual and
the UEM/GMC Transition Setup Guide for details.
8.2.3

Device Troubleshooting in Unified Network Configurator

Use the Unified Network Configurator (UNC) to verify configuration data during system commissioning
and later when you maintain or expand the system. Use UNC to do the following to the device:
• Verify configuration
• Correct configuration errors
See the Unified Network Configurator manual for further details.
8.2.4
GTR 8000 Base Radio Troubleshooting in Configuration/Service
Software
The GTR 8000 Base Radio can be locally or remotely configured or serviced through Configuration/
Service Software (CSS). CSS provides access to alarms, status information, and configuration settings
for the base radio.
Use CSS for the following tasks which may be useful when troubleshooting the base radio. See the
CSS Online Help for specific details and instructions when performing these tasks.
• Enable and disable channels and services
• View and save a log of alarms
Chapter 8: GTR 8000 Base Radio Troubleshooting
MN003286A01-E
217