Receive Alignment Menu - Motorola MCS 2000 User Manual

Receive Alignment
Menu
BC
Function Key Descriptions
F2 - F9
54
From the MAIN MENU, press F2 and then F3 to access this screen.
MOTOROLA Radio Service Software
MCS Model:
MAIN:SERVICE:RECEIVER ALIGNMENT MENU
F1 - HELP
F2 - Front End Bandpass Filter
F3 - Rated Audio Calibration
F4 - Squelch Attenuator (12.5kHz)
F5 - Squelch Attenuator (20kHz)
F6 - Squelch Attenuator (25/30kHz)
F7 - RSSI Alignment
F8 - Secure Rx Discriminator Level
F9 - VRM500 Rx Discriminator Level
F10 - Exit, Return to Service Menu
F1 F2 F3
HELP FRONT END AUDIO SQUELCH SQUELCH SQUELCH
FILT ALGN 12.5kHz 20kHz
Standard periodic receiver alignment procedures are performed from
this menu. Refer to your Radio Service Manual for Receive Alignment
procedures.
This procedure should be attempted only by qualified
!
service personnel. Failure to perform alignment
procedures properly may result in seriously degraded
Caution
radio or system performance.
Refer to your Radio Service Manual for these alignment procedures. Do
NOT attempt these procedures unless you are a qualified service person.
Note: The VRM500 Rx DISCRIMINATOR LEVEL screen can be
accessed only if the current radio model is VRM500-capable.
Select Function F1 - F10.
RECEIVER ALIGNMENT MENU
-----------------------
F4 F5 F6 F7
RSSI
25/30kHz ALGN
F8 F9 F10
SECURE VRM500 EXIT
DISCR