Mdc System Remote Options - Motorola MCS 2000 User Manual

MDC System
Remote Options
DFDCI
I
Function Key Descriptions
F3 - PREV SYS
F4 - NEXT SYS
Field Definitions
MDC System
Remote Mon/Radio Trace
Remote Radio Mode
234
From the MAIN MENU, press F4, F6, F4, F3, F9 and then F9 to access
this screen.
MOTOROLA Radio Service Software
MCS Model:
...MDC:SYSTEMS:OPTIONS:REM OPTIONS
MDC System.........1
Remote Mon/Radio Trace.....Enabled
Remote Radio Mode..Remote Monitor
Tx Base Time (sec).............10
Rx Base Time (sec).............10
F1 F2 F3 F4
HELP PREV NEXT
SYS SYS
This screen allows you to change/view parameters pertaining to the
MDC system remote capabilities of the radio.
Is used to navigate to the previous MDC System while remaining in
the same data field.
NEXT SYS is used to navigate to the next MDC System while
remaining in the same data field.
This is the number of the MDC system. Use the UP/DOWN arrow keys
to change the system, or directly enter the number of the system.
Use the UP/DOWN arrow keys to enable/disable the MDC Remote
Monitor/Radio Trace feature. When the MDC Remote Monitor/Radio
Trace feature is enabled, the radio will be able to decode an MDC
Remote Monitor or Radio Trace command sent from the dispatch
console. After decoding this command, the radio will key-up its
transmitter for a time period calculated using the 'Tx Base Time' and
another value embedded within the Remote Monitor/Radio Trace
command. The factory default is Disabled.
Use the UP/DOWN arrow keys to select the MDC Decode Operation.
The MDC Decode Operation allows the radio to operate in one of two
possible states when it decodes an MDC Remote Monitor/Radio Trace
command:
- Radio Trace
unmodulated carrier.
- Remote Monitor - The radio will automatically key-up and
unmute the microphone thus sending voice on the channel.
Enter or Scroll to Select System.

MDC SYSTEM REMOTE OPTIONS

-------------------------
F5 F6 F7
- The radio will automatically key-up sending
F8 F9 F10
EXIT