Trunking Systems - Motorola MCS 2000 User Manual

Trunking Systems

DDC
From the MAIN MENU, press F4 twice and then F3 to access these
screen.
MOTOROLA Radio Service Software
MCS Model: M01UGN6PW6AN
MAIN:CHANGE/VIEW:TRUNKING:SYSTEM
System.............1
System Key ..............Disabled
System Type.....................I
System ID....................0001
Connect Tone (Hz)#.......0-105.88
Coverage Type............Disabled
Site ID........................0
Dynamic Regrouping........Disabled
Remote Monitor ...........Disabled
F1 F2 F3
HELP ADD PREV
SYSTEM SYSTEM SYSTEM
TRUNKING SYSTEM screen, Type I (800 MHz)
MOTOROLA Radio Service Software
MCS Model: M01WGM4PW6AN
MAIN:CHANGE/VIEW:TRUNKING:SYSTEM
System.............1
System Key...............Disabled
System Type................II/IIi
System ID....................0001
Alias...................Disabled
Individual ID..............1-0001
Connect Tone (Hz)#.......0-105.88
Coverage Type...........SmartZone
Affiliation Type........Automatic
Dynamic Regrouping........Enabled
Zone....Blank Chan....Blank
Remote Monitor........... Enabled
RM Base Time (sec)...........15
F1 F2 F3
HELP ADD PREV NEXT
SYSTEM SYSTEM SYSTEM
TRUNKING SYSTEM screen, Type II/IIi (900 MHz)
This screen is used to program the Trunking System configuration for
your radio. The fields on this screen will vary for Type I and Type II/IIi
systems as shown in the screens above.Press Tab to select the desired field,
or press the desired function key (F1 - F10). If a field is highlighted, use
the UP/DOWN arrow keys to select the desired choice or value.
A Trunking System refers to a specific repeater site, the system ID, the
individual radio ID for that system, the control channel frequencies
and the connect tone required to operate on that system. Each system
that the radio is programmed to operate on is linked to one or more
Trunking personalities. The personality defines the features available
to the radio while operating on that system. Each radio is uniquely
identified on each system by its individual ID.
Enter or Scroll to Select Value.
TRUNKING SYSTEM
---------------
UNIVERSAL ID.................. 1
Size Code......................A
Fleet ID.....................001
Individual ID................000
Access Type.................Slow
Conversation Type........Message
Tx Defeat...............Disabled
This Call ID..............000016
F4 F5 F6
NEXT DELETE CONTROL
SYSTEM CHANNEL
Use UP/DOWN Arrows to Select Choice.
TRUNKING SYSTEM
---------------
OmniLink.................Enabled
F4 F5 F6 F7
DELETE CONTROL
SYSTEM CHANNEL
F7 F8 F9 F10
MORE EXIT
OPTIONS
F8 F9 F10
MORE EXIT
OPTIONS
147