Flashport Upgrade - Motorola MCS 2000 User Manual

FLASHport Upgrade

H
Function Key Descriptions
F2 - VIEW RADIO
F3 - VIEW FLASHKEY
F8 - UPGRADE RADIO
266
At the MAIN MENU, press F8 to access the FLASHport UPGRADE
MENU.
MOTOROLA Radio Service Software
MCS Model:
MAIN:FLASHport UPGRADE
F1 - HELP
F2 - View Radio Configuration
F3 - View FLASHkey Configuration
F4 -
F5 -
F6 -
F7 -
F8 - Upgrade Radio
F9 -
F10 - EXIT, Return to Main Menu
F1 F2 F3
HELP VIEW VIEW
RADIO FLASHKEY
You must have FLASHport software installed on your computer in order to
access this screen from the MAIN MENU. This is a menu that is used to
view the radio's configuration, to view the FLASHkey's contents, to
upgrade the codeplug, and to FLASH the radio. The HELP screen (F1)
and the User's Manual that came with your FLASHport Upgrade
package will guide you through the upgrade process.
Note: If you have NOT installed the FLASHport software on your
computer, the RSS will display the following error message:
"UNABLE TO OPEN THE SRIB SOFTWARE FILE. PLEASE PRESS
F9 FROM THE MAIN MENU AND CHECK THE PATH".
Note: After upgrading the radio, you must reset it by pressing the
power button off and on again.
Displays the radio's current system and enhancements prior to the
FLASHport upgrade. You must have specified the displayed information
when you order a FLASHport upgrade package from the subscriber. Since the
FLASHport upgrade involves downloading new software to the radio,
the memory size of the radio's controller board will also be displayed
in order to reveal possible memory limitations in FLASHing the radio.
Displays the contents of the FLASHkey you will receive with your
FLASHport upgrade package. This screen displays information such as
the FLASH software required, number of purchased and remaining
upgrades, and a side-by-side comparison of the features currently
enabled in the radio and the features that will be enabled when the
radio is FLASHed.
Brings up the screen which displays the names of the files that exist in
the default directory for the FLASH software. You will be asked to select
a FLASH software file. When this is done, press F8 in order to start the
upgrade process.
Select Function F1 - F10.
FLASHPORT UPGRADE MENU
----------------------
F4 F5 F6 F7 F8 F9 F10
UPGRADE EXIT
RADIO