Radio Wide Scan Options - Motorola MCS 2000 User Manual

Radio Wide Scan
Options
DCEH
Field Definitions
Nuisance Mode Delete
Priority Scan Alert
128
From the MAIN MENU, press F4, F3, F5 and then F8 to access this
screen.
MOTOROLA Radio Service Software
MCS Model:
MAIN:CHANGE/VIEW:CONFIG:SCAN:OPTIONS
RADIO WIDE
----------
Nuisance Mode Delete......Disabled
Priority Scan Alert.......Disabled
Rx Hold Time (sec)...............3
HUB Suspends Scan..........Enabled
Suspend All Scan.........Disabled
F1 F2 F3
HELP
This screen is used to customize the Channel Scan feature for specific
applications. Options and parameters that affect Radio wide,
Conventional and Trunking operations are available. Press Tab to
select the desired field, or press the desired function key (F1 - F10). If
a field is highlighted, press the UP/DOWN arrow keys to select the
desired choice or value.
Use the UP/DOWN arrow keys to enable/disable this feature. The
Nuisance Mode Delete setting allows the user to temporarily delete
from the scan list non-priority channels that are constantly busy. Such
activity may cause the radio to be constantly locked onto a channel. A
channel deleted using this option will remain deleted until scan is turned off.
When scan is turned on, all channels that were previously deleted will be
replaced.
The default is Enabled.
Use the UP/DOWN arrow keys to enable/disable this feature. If this
option is enabled, the radio will audibly alert you in one of two ways
described below when it unmutes on a priority channel while
scanning:
One beep is generated for the priority talkgroup/subfleet in a
Trunked scan list or for the first priority channel in a
Conventional scan list.
Two beeps are generated for the second priority channel in a
Conventional scan list.
The default is Disabled.
Use UP/DOWN Arrows to Select Choice.
SCAN OPTIONS
------------
CONVENTIONAL
------------
Carrier Detect Required...Disabled
Priority Chan Marking.....Disabled
Monitor Hold Time (sec)..........6
Voting Scan...............Disabled
TRUNKING
--------
Failsoft Hold Time (sec).........6
System Search Time (sec).........1
F4 F5 F6 F7 F8 F9 F10
EXIT