Auxiliary Menu - Motorola MCS 2000 User Manual

Auxiliary Menu

DFG
Function Key Descriptions
F2 - SINGLE SYSTEM
(Singletone System)
F3 - SINGLE TONES
(Single Tones List)
F4 - QUIK-CALL II
F5 - GE STAR SYSTEM
From the MAIN MENU, press F4, F6, and then F7 to access this screen.
MOTOROLA Radio Service Software
MCS Model:
MAIN:CHANGE/VIEW:CONV:AUX
F1 - HELP
F2 - Singletone Systems
F3 - Singletone List
F4 - Quik-Call II Systems
F5 - GE STAR Systems
F6 -
F7 -
F8 -
F9 -
F10 - EXIT
F1 F2 F3
HELP SINGLE SINGLE QUIK
SYSTEM TONES CALL-II SYSTEM
This menu contains the advanced Conventional signalling features
other than MDC.
Brings up the SINGLETONE SYSTEM screen. The Single Tone feature
allows the capability to selectively access repeaters. The Single Tone
Systems defined from this screen can be specified in the CONV PERS
RAC OPTIONS screen (F4/F6/F3/F9/F7) by setting the Repeater Access
field to Enabled.
Brings up the SINGLE TONE LIST screen which contains the
programmable tone frequencies for the Single Tone Feature.
Brings up the QUIK-CALL II SYSTEM screen. The Quik-Call II feature
provides a decoding method for the radio to unmute when receiving
the proper tones programmed in the systems. The systems defined
from this option can be chosen in the CONVENTIONAL
PERSONALITY screen (F4/F6/F3) under the following conditions:
1. If GE STAR is used as the signalling type, DOS must be disabled in the
specified GE STAR system; and
2. If MDC is used as the signalling type, DOS and MDC Demodulator need
to be disabled.
Brings up the GE STAR SYSTEM screen. GE STAR is a signalling
protocol which provides such features as Data Operated Squelch
(DOS), Emergency Alarm, and PTT-ID. The GE STAR systems defined
from this menu option can be specified in the CONVENTIONAL
PERSONALITY screen (F4/F6/F3) when GE STAR is selected for the
signalling field.
Select Function F1 - F10.
AUXILARY SYSTEMS MENU
---------------------
F4 F5 F6 F7
GE STAR
F8 F9 F10
EXIT
239