Motorola MCS 2000 User Manual page 52

Programming Procedure
Function Key Descriptions
F6 - TOGGLE PTT
F8 - PROGRAM VALUE
Field Definition
New Softpot Value
46
1. Press F6 to key up the radio. (The radio's RF output must be
terminated into a 50 ohm load.)
2. Apply the appropriate signal according to instructions in your
Radio Service Manual.
3. While transmitting, modify the Balance Attenuator setting using
the UP/DOWN arrow keys. To increase the adjustment speed, use
the Shift-UP/DOWN arrow keys.
4. A relative Tx power value will be displayed, but you must
determine the actual transmitter power output from the service
monitor.
5. Press F6 to de-key the radio and Tab to move between frequency
points.
6. Press F8 to save the new value.
Alternately keys and de-keys the radio being serviced.
Programs the selected value into the radio.
This is the balance value for this frequency. The status bar shows the
relationship between this setting and the minimum and maximum
settings.