Motorola MCS 2000 User Manual page 119

Field Definitions
Conv Item
CALL Select Private Call ID and send Private Call.
For the radio to function properly, the Selective Call feature must be enabled on the PERSONALITY
MDC OPTIONS screen (F4/F6/F3/F7) and the Signalling Type must be set to MDC.
CHAN Select/change Channels.
DIM Change the display brightness to one of four levels: from off to high, high to medium, medium to
low, or low to off.
DIR Enable/disable Talkaround.
For the radio to function properly, this feature must also be enabled on the CONVENTIONAL PERSONALITY
screen (F4/F6/F3).
H/L Enable/disable Horn and Lights.
This feature must also be enabled on the ALARM OPTIONS screen (F4/F3/F7).
HAND Toggle between Handset and Microphone operation. In Handset operation, the audio is re-routed to
the Handset speaker for a private conversation when the handset is removed from its hang-up clip. In
Microphone operation, the audio is always routed through the speaker.
This feature is not compatible with the Hand Held Control Head (HHCH) feature.
MSG Display the last acknowledged message to be transmitted and send a message.
MUTE Enable/disable keypad beeps.
PAGE Select Call Alert ID and send a Call Alert.
For the radio to function properly, this feature must also be enabled on the PERSONALITY MDC OPTIONS
screen (F4/F6/F3/F7).
PHON Select DTMF Phone Number to be transmitted.
For the radio to function properly, this feature must also be enabled on the CONVENTIONAL PERSONALITY
screen (F4/F6/F3).
PROG Change Phone/Scan lists.
For the radio to function properly, the Phone and/or the Scan feature must also be enabled on the
CONVENTIONAL PERSONALITY screen (F4/F6/F3).
PSWD Change Radio Lock Password.
For PSWD to show on the RADIO WIDE MENU ITEM CONFIGURATION screen. RADIO LOCK must
be enabled on the RADIO WIDE DISPLAY OPTIONS screen (F4/F3/F6).
PWR Enable/disable Tx Low Power.
SCAN Enable/disable Channel Scan.
For the radio to function properly, a scan list must be specified on the CONVENTIONAL PERSONALITY
screen (F4/F6/F3).
STS Display the last acknowledged status to be transmitted and send status.
TX IN Enable/disable Tx Inhibit.
VIEW View Phone/Scan/Call lists.
For the radio to function properly, the Phone, Scan or Call List features must also be enabled on the
CONVENTIONAL PERSONALITY screen (F4/F6/F3).
ZONE Select/change Zones.
Use the UP/DOWN arrow keys to select the desired menu function.
Press F2 to add and F4 to delete the highlighted Conventional item.
Depending on your radio version and model number, you will be able to
choose from some or all of the functions listed below.
113