Motorola MCS 2000 User Manual page 178

Private Call Type
Operation
Call Alert Operation
172
Use the UP/DOWN arrow keys to select the desired Private Call type
from among the following:
PC I Limited to selected fleet and pool. (800 MHz, Type I
personalities only).
PC II Permits calls between fleets and sends an initiator ID so that
the person receiving the call will know who sent it (800
MHz, Type I, II and IIi personalities).
PC I/II Permits both PC I and PC II calls (Type I personalities only).
Enhanced PC Telephone-like operation (Type II and IIi personalities only).
Disabled Deactivates the Private Call feature for this personality.
Note: Radio controls may require additional setup for your Private
Call configuration. Refer to the RADIO WIDE BUTTON/SWITCH
CONFIGURATION MENU (F4/F3/F3) help screen for details.
This field will be visible only if the Private Call Type field is set to a value
other than Disabled. Use the UP/DOWN arrow keys to select the
operation of the Private Call feature for this personality from among
the following:
Response Only Allows the radio to only accept calls.
List Only Allows the user to make calls from the page list.
Unlimited Requires full keypad. Allows the user to make calls from the
call list and from the keypad, and to modify the call ID list.
Disabled No Private Call operation is allowed. Select Disabled to
disable paging facilities.
The default is Disabled.
Use the UP/DOWN arrow keys to select Call Alert (Page) operation for
the current personality. Call Alert allows the operator to receive and
transmit pages either by typing in a six-digit decimal ID (Unlimited)
or by selecting one of the IDs in the Trunking Call ID list (List Select).
Response Only Allows the radio to accept pages only.
List Only Allows the user to send pages from the page list.
Unlimited Allows the user to send pages from the page list and from
the keypad. This also allows the radio user to modify the
page ID list. (Requires full keypad.)
Disabled No Call Alert operation is allowed. Disables paging facilities.
Note: Radio controls may require additional setup for your Call Alert
configuration. Refer to the RADIO WIDE BUTTON/SWITCH
CONFIGURATION MENU (F4/F3/F3) help screen for details.
The default is Disabled.