Conventional Personality - Motorola MCS 2000 User Manual

Conventional
Personality
DFC
Function Key Descriptions
F2 - ADD PERS
F3 - PREV PERS
F4 - NEXT PERS
F5 - DELETE PERS
F6 - SECURE OPTIONS (not
shown)
F7 - MDC OPTIONS
From the MAIN MENU, press F4, F6 and then F3 to access this screen.
MOTOROLA Radio Service Software
MCS Model:
MAIN:CHANGE/VIEW:CONV:PERS
Personality........1
Receive Only..............Disabled
Direct / Talkaround........Enabled
Time Out Timer..........3-
Scan List.....................None
Hot Keypad................Disabled
Phone Operation..........Ünlimited
Frequency (MHz)
Squelch Type
Code
DPL Invert
F1 F2 F3
HELP ADD PREV NEXT
PERS PERS PERS
This screen allows the user to edit information for Conventional
operation. Press Tab to select the desired field, or press the desired
function key (F1 - F10). If a field is highlighted, use the UP/DOWN
arrow keys to select the desired choice or value.
Adds a Conventional personality. A maximum of 10 Conventional
Personalities may be created. Each personality must be "connected" to
a channel on the ZONE/CHANNEL ASSIGNMENT screen (F4/F8).
Accesses the previous personality.
Accesses the next personality.
Removes the current personality. You will be prompted for
confirmation before the personality is deleted. A minimum of one
Conventional personality must be maintained.
Note: The only way to recover a deleted personality is to immediately
re-read the radio or the archive file. However, any other changes
that were made and not previously saved will still be lost.
This function will be active only when a radio equipped with SECURE
hardware has been read. Accesses the SECURE parameters linked to this
personality.
This function will be active only when a radio with MDC capabilities has
been read and the Signalling Type field is set to MDC. Allows access to
MDC parameters linked to this personality. Other system-wide MDC
parameters are located on the MDC SYSTEM screen (F4/F6/F4/F3).
Enter or Scroll to Select System.

CONVENTIONAL PERSONALITY

------------------------
Signalling....................MDC
MDC System #...................1
60 PTT ID..................Disabled
Emerg. PTT ID...........Disabled
Revert..........Selected Channel
Quik-Call II System #...Disabled
Receive Transmit
136.06250 136.01250
CSQ Disabled
F4 F5 F6 F7
DELETE SECURE MDC
PERS OPTIONS OPTIONS OPTIONS
Direct
136.06250
Disabled
F8 F9 F10
PHONE MORE EXIT
OPTIONS
203