Trunking Print Menu - Motorola MCS 2000 User Manual

Trunking Print Menu

ED
Function Key Descriptions
F2 - TRUNK WIDE OPT
F3 - TRUNK SYS
F4 - TRUNKING PERSONALITY
F5 - TRUNK ID LIST
F7 - CONTROL CHANNEL
258
At the MAIN MENU, press F5 and then F4 to bring up the TRUNKING
PRINT MENU.
MOTOROLA Radio Service Software
MCS Model:
MAIN:PRINT:TRUNKING
F1 - HELP
F2 - Trunking Radio Wide Options
F3 - Trunking Systems: System ID, Control Channels, etc.
F4 - Trunking Personality:
F5 - Trunking Call List Data
F6 -
F7 - Control Channels (UHF and VHF only)
F8 -
F9 -
F10 - EXIT, Return to PRINT MENU
F1 F2 F3
HELP TRUNK TRUNK TRUNK
WIDE OPT SYS PERS
You must use the GET/SAVE functions to first read or get a codeplug for
printing radio configuration data. The PRINT function is used to produce
permanent records of codeplug configurations. A printer is required
and should be connected to your computer according to the
instructions in the user's manual that came with your computer.
Graphics capability is NOT required.
Each print-out contains radio model and serial number information,
software version numbers, Radio Service Software version numbers,
and the date and time of the print-out.
Note: When printing, misalignment of page breaks may result if the
printer is not set up properly. For best results, configure the printer
as an IBM ProPrinter or an Epson FX/MX having factory default
settings. The default number of lines per page is 66.
Prints information about options which are applicable to all Trunking
operations, regardless of system type.
Prints Trunking system information.
Prints the Trunking personality and talkgroups.
Prints the screen which documents the Trunking call lists.
Prints the CONTROL CHANNELS screen (VHF/UHF only).
Select Function F1 - F10.
TRUNKING MENU
-------------
Talk Groups, Emergency options, etc.
F4 F5 F6 F7
TRUNK ID CONTROL
LIST CHANNEL
F8 F9 F10
EXIT